Floor renovation calculator

Powered by CalcMyFloor
1

Project settings

Units
2

Room geometry

Area 1 · Shape
12′ -0″10′

Net area 120.0 ft² · perimeter 44′ · baseboard 41′ 4″

Exclusions (0)

Kitchen island, bathtub, shower pan, built-in closet…

Doorways (1)
3

Floor build-up

Finish
4

Screed

min 1.97 in · max 3.94 in · 2 kg/m²/mm · typical — check your product’s data sheet

Construction
Thickness
kg/m²/mm
lb
%

Average 1.97 in · min 1.97 in · max 1.97 in · volume 0.77 yd³

Wet weight 2,458 lb · load 20.5 lb/ft²

Drying before laying the finish: about 60 days

5

Tiles

Shape
Sold as

Substrate prep

Thinset

%

Grout

Grout
kg/dm³
%

Accessories

Defaults to the total door width.

Weight and height

lb

Leave 0 to estimate it from the coverage.

6

Extras

Primer

Before screed
Before tiling
L/m²

Baseboard

Fixing

Waterproofing (wet areas)

7

Floor height and doors

Keep more if the gap under the door is the return-air path for heating or cooling.

Door 1

From the bottom of the door to the current floor. Leave 0 if not measured.

0 if the next room keeps its floor.

Layer, bottom to topThickness
Screed or mortar bed1 15/16 in · 50 mm
Thinset bed (1/2 in notch)3/16 in · 4.2 mm
Porcelain tile3/8 in · 9.5 mm
Grout—
New layers2 1/2 in · 63.7 mm
Old covering taken up—
The floor goes up by2 1/2 in · 63.7 mm

Door 1

Enter the gap under the door to check it.

Step to the next room 2 1/2 in · 63.7 mm: too high for a reducer. Use a threshold or ramp profile, or rethink the build-up.

Thinset and adhesive beds are estimated from their coverage (1 kg of powder ≈ 0.7 mm per m²). Thicknesses are typical — check your products.

8

Floor weight

The floor sits on
LayerWeight
Screed or mortar bed20.48 lb/ft²
Thinset bed (1/2 in notch)1.23 lb/ft²
Porcelain tile4.58 lb/ft²
Grout0.02 lb/ft²
Whole floor build-up26.32 lb/ft²
For the room (120 ft²)3,158 lb

Without the screed: 5.84 lb/ft², 701 lb for the room.

Weight to carry: 3,510 lb

  • Sand-cement mix, bagged (sand topping mix): 33 bags × 80 lb
  • Tile 24 × 12 in: 9 boxes × 73.4 lb (estimated from typical density; enter the box weight for an exact figure)
  • Thinset mortar (1/2 in notch): 4 bags × 50 lb
  • Grout (cementitious): 1 pack × 10 lb

Densities are typical values. Box and pack weights printed on the packaging are more accurate.

66 tiles · 9 boxes · 33 bags screed